Param Gloss
From krc
(Difference between revisions)
Line 39: | Line 39: | ||
== Alphabetical Name List == | == Alphabetical Name List == | ||
+ | [[A|A:]] | ||
+ | :[[ALBEDO|ALBEDO]] | ||
+ | [[B|B:]] | ||
+ | |||
+ | [[C|C:]] | ||
+ | |||
+ | [[D|D:]] | ||
+ | |||
+ | [[E|E:]] | ||
+ | |||
+ | [[F|F:]] | ||
+ | |||
+ | [[G|G:]] | ||
+ | |||
+ | [[H|H:]] | ||
+ | |||
+ | [[I|I:]] | ||
+ | |||
+ | [[J|J:]] | ||
+ | |||
+ | [[K|K:]] | ||
+ | |||
+ | [[L|L:]] | ||
+ | |||
+ | [[M|M:]] | ||
+ | |||
+ | [[N|N:]] | ||
+ | |||
+ | [[O|O:]] | ||
+ | |||
+ | [[P|P:]] | ||
+ | |||
+ | [[Q|Q:]] | ||
+ | |||
+ | [[R|R:]] | ||
+ | |||
+ | [[S|S:]] | ||
+ | :[[SLOPE|SLOPE]] | ||
+ | |||
+ | :[[SLOAZI (Azimuth)|SLOAZI (Azimuth)]] | ||
+ | |||
+ | [[T|T:]] | ||
+ | :[[T (Temperature)|T (Temperature)]] | ||
+ | :[[TAUD (Dust Opacity)|TAUD (Dust Opacity)]] | ||
+ | |||
+ | |||
+ | [[U|U:]] | ||
+ | |||
+ | [[V|V:]] | ||
+ | |||
+ | [[W|W:]] | ||
+ | |||
+ | [[X|X:]] | ||
+ | |||
+ | [[Y|Y:]] | ||
+ | |||
+ | [[Z|Z:]] | ||
== Alphabetical Category List == | == Alphabetical Category List == | ||
+ | [[A|A:]] | ||
+ | |||
+ | :[[Albedo|Albedo]] | ||
+ | |||
+ | [[B|B:]] | ||
+ | |||
+ | [[C|C:]] | ||
+ | |||
+ | [[D|D:]] | ||
+ | |||
+ | [[E|E:]] | ||
+ | |||
+ | :[[Emissivity|Emissivity]] | ||
+ | |||
+ | [[F|F:]] | ||
+ | |||
+ | :[[Frost|Frost]] | ||
+ | |||
+ | [[G|G:]] | ||
+ | |||
+ | [[H|H:]] | ||
+ | |||
+ | [[I|I:]] | ||
+ | |||
+ | :[[Inertia|Inertia]] | ||
+ | |||
+ | [[J|J:]] | ||
+ | |||
+ | [[K|K:]] | ||
+ | |||
+ | [[L|L:]] | ||
+ | |||
+ | :[[Layers|Layers]] | ||
+ | |||
+ | [[M|M:]] | ||
+ | |||
+ | :[[Morphology (Slope, Elevation, etc.)|Morphology (Slope, Elevation, etc.)]] | ||
+ | |||
+ | [[N|N:]] | ||
+ | |||
+ | [[O|O:]] | ||
+ | |||
+ | :[[Opacity|Opacity]] | ||
+ | |||
+ | [[P|P:]] | ||
+ | |||
+ | [[Q|Q:]] | ||
+ | |||
+ | [[R|R:]] | ||
+ | |||
+ | [[S|S:]] | ||
+ | |||
+ | :[[Subsurface|Subsurface]] | ||
+ | |||
+ | :[[Spin-Up|Spin-Up]] | ||
+ | |||
+ | [[T|T:]] | ||
+ | |||
+ | :[[Temperature|Temperature]] | ||
+ | |||
+ | [[U|U:]] | ||
+ | |||
+ | [[V|V:]] | ||
+ | |||
+ | [[W|W:]] | ||
+ | |||
+ | [[X|X:]] | ||
+ | |||
+ | [[Y|Y:]] | ||
+ | |||
+ | [[Z|Z:]] | ||
== Search for Term by Name == | == Search for Term by Name == |
Revision as of 16:37, 13 July 2017
Contents |
Basic Terms and Defintions
Now its time to learn the basic input variables used in KRC.
- Thermal Inertia: the reluctance of a material to change temperature
- Conductivity: how easily a material transports heat and energy through itself
- Density: the amount of mass, or matter, contained within a specific volume
- Specific Heat: the amount of energy required to raise the temperature of a material
- Input parameters: values given by the user, used in calculations within the model
- Opacity: the translucence of a material
- Albedo: the brightness of a material
- Emissivity: the energy given off by a material
- Slope: angle of incline of a surface above or below horizontal
- Azimuth: direction of slope as measured starting from north and moving through east
- LS : The seasonal indicator. The Value used to distinguish the time of year. The time of year
- Pressure:
Advanced Terms and Definitions
- Single Layer Atmosphere: A thin atmosphere where, at any given time, the temperature is the same everywhere. Even though temperature can vary with time, the entire atmosphere varies together.
- Two-Stream Delta-Eddington Model: Allows for two spectral regions in the atmosphere: solar and thermal
- Solar Radiation: The energy reaching the surface from the sun itself
- Thermal Energy: The energy reaching the surface from emission of the atmosphere itself