Beginner Tutorial
Contents |
Already Familiar with KRC?
- If you are already familiar with KRCC's basic functionality, please see the Advanced Tutorial.
Download KRC or check which Version you have
- To start using KRC, be sure you have already downloaded latest version. If you already have KRC, but do not know if you have the latest version, you can check which version you have here.
Once you have the latest version, it is time to start using KRC.
Getting Started
- To start using KRC, you must first start the Davinci Interface. To learn more about Davinci visit the DavinciWiki
Remember: The KRC Davinci Interface is reffered to as Davinci, and using KRC with input files is referred to as KRC.
Type the following:
$ davinci dv>
Now, you can start using KRC.
Type the following:
dv> krc()
This command will bring up a the KRC Main Menu:
This runs the full krc binary mode with the following inputs
IMPORTANT: This interface supports only KRC > v2.3.2
lat = latitude **Required**
lon = east longitude (default = 0)
body = name of the body (Default = "Mars")
bodytype = kind of body - "planet", "minor", "comet" (Default = "planet")
hour = hour of day for data to return (default=-32768, all hours)
ls = ls for data to return (default=-32768, all seasons)
INERTIA = thermal inertia of upper layers (default from 2ppd TES)
Mat1 = material of upper layers, sets COND, DENSITY, SPEC_HEAT (Default="basalt")
Por1 = porosity of upper layers, affects DENSITY (Default=0.4)
INERTIA2 = thermal inertia of lower layers (Default from 2ppd TES)
Mat2 = material of lower layers, sets COND2, DENS2, SpHeat2 (Default="Mat1")
Por2 = porosity of lower layers, affects DENS2 (Default=Por1)
thick = top layer thickness (default=0, no layering)
TDEEP = set bottom layer temperature (default TDEEP=0, IB=0, insulating)
JBARE = force frost free at specified season (default JBARE=0, no forcing)
SLOPE = surface slope in degrees (default = 0)
ALBEDO = albedo (default from lat,lon 2ppd TES)
TAUD = dust visible opacity (default TAUD= 0.30)
ELEV = elevation km (default from lat,lon 2ppd MOLA)
SLOAZI = slope azimuth in degrees east from north (default = 0)
DELLS = ~delta Ls desired (sets DELJUL automatically, Default = 1)
DELJUL = delta julian date to increment by (Default = 1.9083)
DJUL = if LKEY="T", starting Ls (Default = 0.1)
or start julian date offset from J2000
LKEY = use Ls DJUL input rather than jullian date (Default ="T")
JDISK = start "season" to output (Default = 721)
N5 = number of "seasons" to run (Default = 1080)
N24 = number of outputs per day (Default = 96)
LkofT = use temperature dependant properties (Default = "T")
TPREDICT = use forward prediction of temperatures for speed (Default ="T")
stability = check for model stability (Default = 0)
outusage = displays the bin52 file type usage
KRC-ONE like option:
T = sets a one-point like mode where a TI is returned
for the specified conditions. This can be an array.
These values are from the standard KRC input file. Defaults from above are
used in place of the master.inp file values.
Enter for more usage
Read TEXT file: 61 lines
Real Value Parameters (Values from default input file)
############################################################################
ALBEDO = .25 EMISS = 1.00 INERTIA = 200.0 COND2 = 2.77
DENS2 = 928.0 PERIOD = 1.0275 SPEC_HEAT= 647. DENSITY = 1600.
CABR = 0.11 AMW = 43.5 ABRPHA = -0.00 PTOTAL = 546.0
FANON = .055 TATM = 200. TDEEP = 180.0 SpHeat2 = 1711.
TAUD = 0.3 DUSTA = .90 TAURAT = 0.5 TWILI = 0.0
ARC2 = 0.5 ARC3 = -0.00 SLOPE = 0.0 SLOAZI = 90.
TFROST = 146.0 CFROST = 589944. AFROST = .65 FEMIS = 0.95
AF1 = 0.54 AF2 = 0.0009 FROEXT = 50. FD32 = 0.0
RLAY = 1.2000 FLAY = .1800 CONVF = 2.0000 DEPTH = 0.0
DRSET = 0.0 DDT = .0020 GGT = 0.1 DTMAX = 0.1
DJUL = -1222.69 DELJUL = 17.174822 SOLARDEC= 00.0 DAU = 1.465
LsubS = .0 SOLCON = 1368. GRAV = 3.727 AtmCp = 735.9
ConUp0 = 0.038640 ConUp1 = -0.002145 ConUp2 = 0.002347 ConUp3 = -0.000750
ConLo0 = 2.766722 ConLo1 = -1.298966 ConLo2 = 0.629224 ConLo3 = -0.527291
SphUp0 = 646.6275 SphUp1 = 246.6678 SphUp2 = -49.8216 SphUp3 = 7.9520
SphLo0 = 1710.648 SphLo1 = 721.8740 SphLo2 = 57.44873 SphLo3 = 24.37532
Enter for more
Integer Value Parameters (Values from default input file)
############################################################################
N1 = 20 N2 = 384 N3 = 15 N4 = 19
N5 = 120 N24 = 24 IB = 0 IC = 7
NRSET = 3 NMHA = 24 NRUN = 0 JDISK = 81
IDOWN = 0 FlxP14 = 45 FlxP15 = 65 KPREF = 1
K4OUT = 52 JBARE = 0 Notif = 20 IDISK2 = 0
end = 0
Boolean Parameters (Values from default input file)
############################################################################
LP1 = F LP2 = T LP3 = F LP4 = F
LP5 = F LP6 = F LPGLOB = F LVFA = F
LVFT = F LkofT = F LPORB = T LKEY = F
LSC = F spare = F LOCAL = T Prt76 = F
LPTAVE = F Prt78 = F Prt79 = F L_ONE = F
Found Default File: $DV_SCRIPT_FILES/krc_support/porb_defaults/Mars_Mars.porb.hdf
Enter for more
K4OUT = 52. This interface only supports bin52 output which encapsulates most of the other file formats
NOTE: Recommended parameter changes are listed in the first section.
Please use these paramters with caution. They are meant for advanced users.
N1 (the number of layers, Default=29) is calculated in the function evalN1_krc()
This function relies on various parameters including FLAY, RLAY, length of the year
to calculate the minimum number of layers required to reach seasonal skindepth stability
N2 (the number of calculations per day, Default=288) is calculated in the functin evalN2_krc()
This function relies varous parameters including FLAY, N24, PERIOD
The default model iterates for 2 years before
outputing a full year (N5-JDISK) of data at 1/360th year intervals (DELJUL),
starting at DJUL=0 (in Ls), JDISK=721, DELJUL=1.9083
from 24.0/N24 to 24 by 24.0/N24 (15 minutes with N24=96).
First layer is set at FLAY=0.18 skin depths.
Each successive layer is increased by a factor of RLAY=1.2.
ALBEDO and TAUD can be dynamic if input as
2 x n x 1 arrays. Ls = column 1 and ALBEDO/TAUD = column 2
See the helplist distributed with KRC for variable meanings and default values.
C.Edwards + S.Piqueux 2/13
This menu offers quick guides to the basic input parameters
The next step is to generate simple runs with KRC.
Simple Runs
- Try designating a specific location to run the KRC model.
Use the landing site of the Curiosity Rover within Gale Crater.
Latitude: 4.5o S Longitude: 137.4o E
KRC takes positive values for Northern latitudes and negative values for Southern latitudes. But KRC only takes positive values for longitude. Therefore, Western longitudes must be subtracted from 360o to be input as positive Eastern longitude values.
See the Helplist, Input Parameter Glossary. or use the KRC Main Menu to learn input parameter variable names and definitions.
dv> krc(lat = -4.5, lon = 137.4)
You should see the following output. If you do not see this message, check the previous line and try again.
Found Default File: $DV_SCRIPT_FILES/krc_support/porb_defaults/Mars_Mars.porb.hdf
./nfs/software/davinci_install/share/davinci//library/script_files/krc_support/ti_map2ppd_v4.vicar: VICAR bsq image: 720x360x1, 32 bits
./nfs/software/davinci_install/share/davinci//library/script_files/krc_support/albedo_2ppd.vicar: VICAR bsq image: 720x360x1, 32 bits
./nfs/software/davinci_install/share/davinci//library/script_files/krc_support/mola_2ppd.vicar: VICAR bsq image: 720x360x1, 32 bits
Running KRC model with:
Output:
Every ~1.000 Ls (1.9083 JD) for 360 seasons starting at 0.10 Ls
For 96 times per day, every 15 local minutes
Running model WITH NO temperature prediction
because DELJUL < 3.0779
For a Surface With:
29 Layers with uniform material properties and 384 daily model time steps
and T-dependant material properties
and an insulating bottom edge condition
With Observation Parameters:
LATITUDE: -4.50 LONGITUDE: 137.40
ELEVATION: -3.606km^ SLOPE/AZIMUTH: 0.00/0.00deg
ALBEDO: 0.228^ OPACITY: 0.300
HOUR: All LS: All
Upper Material:
INERTIA: 230.00
CONDUCTIVITY: 0.0502*
DENSITY: 1770.00*
SPECIFIC HEAT: 595.55
POROSITY: 0.40
* = derived value unless overwritten by user
^ = from TES 2ppd map unless overwritten by user
& = ajusted for max authorized value
struct, 14 elements
tsurf: 96x1x360 array of double, bsq format [276,480 bytes]
tbol: 96x1x360 array of double, bsq format [276,480 bytes]
tatm: 96x1x360 array of double, bsq format [276,480 bytes]
down_ir: 96x1x360 array of double, bsq format [276,480 bytes]
down_vis: 96x1x360 array of double, bsq format [276,480 bytes]
time: 96x1x1 array of float, bsq format [384 bytes]
ls: 1x1x360 array of double, bsq format [2,880 bytes]
lat: -4.500000000
elev: -3.605580091
layer: struct, 8 elements
thickness: 28x2x1 array of double, bsq format [448 bytes]
center: 28x2x1 array of double, bsq format [448 bytes]
top: 28x2x1 array of double, bsq format [448 bytes]
center_mass: 28x1x1 array of double, bsq format [224 bytes]
mass_burden: 28x1x1 array of double, bsq format [224 bytes]
thermal_scales: 28x1x1 array of double, bsq format [224 bytes]
tmax: 28x1x360 array of double, bsq format [80,640 bytes]
tmin: 28x1x360 array of double, bsq format [80,640 bytes]
anc: struct, 11 elements
krccom: struct, 5 elements...
JDate: 1x1x360 array of double, bsq format [2,880 bytes]You need not worry about most of this output, as you will most likely not need to investigate the output or script files.
ref_pressure: 1x1x360 array of double, bsq format [2,880 bytes]
taud: 1x1x360 array of double, bsq format [2,880 bytes]
total_frost: 1x1x360 array of double, bsq format [2,880 bytes]
avg_heat_flow: 1x1x360 array of double, bsq format [2,880 bytes]
frost_alb: 1x1x360 array of double, bsq format [2,880 bytes]
frost: 1x1x360 array of double, bsq format [2,880 bytes]
tatm_predict: 1x1x360 array of double, bsq format [2,880 bytes]
delta_t_rms: 1x1x360 array of double, bsq format [2,880 bytes]
converge_days: 1x1x360 array of double, bsq format [2,880 bytes]
version: "v3.2.1"
alb: 0.2282352895
body: "Mars"
Interpreting the Output
You need not worry about the first few lines of output, as you will most likely not need to investigate the output or script files.
The rest of the output is a multi-element structure consisting of model outputs as well as the initial input parameters. Some of these outputs (i.e. Kinetic Surface Temperature, tsurf, Bolometeric Temperature, tbol, and Atmospheric Temperature, tatm, are three dimensional elements where the first dimension contains the values for all hours of a single day, and the third dimension contains all values for all LS of a single year.
If you set the function krc() equal to a variable, you can access the elements contained within the output.
dv> test = krc(lat=12)
To access the elements simply type the variable name followed by a period, then the element you wish to examine. Be careful to keep the dimensions of the element consistent.
To see basic information about the element:
dv> test.tsurf[,,] 96x1x360 array of double, bsq format [276,480 bytes]
Or:
dv> test.tsurf 96x1x360 array of double, bsq format [276,480 bytes]
To see all values for a specific season:
dv> test.tsurf[,,105] 96x1x1 array of double, bsq format [768 bytes] 171.5856935 171.1550320 170.7370510 170.3293537 169.9308028 169.5406723 169.1583461 168.7833589 168.4152575 168.0536924 167.6983010 167.3488043 167.0048976 166.6663525 166.3329117 166.0043847 165.6805461 165.3612358 165.0462598 164.7354822 164.4287279 164.1258806 164.8784105 169.1850639 175.8574576 184.1348010 193.0209648 201.8500108 210.2748614 218.1462596 225.4199940 232.1023999 238.2214758 243.8125454 248.9114546 253.5516366 257.7629989 261.5717402 265.0005054 268.0687358 270.7930092 273.1874139 275.2638321 277.0322298 278.5008521 279.6764380 280.5643349 281.1686471 281.4922865 281.5370772 281.3037515 280.7920112 280.0004782 278.9267210 277.5671609 275.9170552 273.9703619 271.7196781 269.1560659 266.2689434 263.0458944 259.4725498 255.5324779 251.2072449 246.4767807 241.3204027 235.7192896 229.6618763 223.1557308 216.2532801 209.1076064 202.0783448 195.7509294 190.7815122 188.2797335 186.4750573 185.0143727 183.7710532 182.6794830 181.7005257 180.8088599 179.9870621 179.2225887 178.5060773 177.8303253 177.1896796 176.5795809 175.9963471 175.4369088 174.8987397 174.3796661 173.8778849 173.3918072 172.9201071 172.4615814 172.0152291
To see a value for a specific time of day during a specific season:
dv> test.tsurf[13,,105] 167.0048976
More Runs
Now, add some more input parameters into the model. The following line is an example of possible variables that might be included in a simple run.
dv> krc(lat = -4.5, lon = 137.4, ELEV = -4.4, SLOPE = 1.2, SLOAZI = 43)
Elevation is in units of kilometers, slope and azimuth (SLOAZI) are both in degrees. The output should be similar to the previous Run, but with the new specific parameters.
Remember, you can learn more about the KRC parameters in the Helplist, Input Parameter Glossary. or use the KRC Main Menu
Plot model Parameters
Various Example Plots
Here are some examples of plots that KRC can create once the model is understood. View more plots here
Description
The ability to plot temperature variations with KRC is one of the most useful features with the KRC Davinci Interface. It provides a method to visually inspect surface properties based on changes in time over the course of a single day or an entire year.
We will be plotting the output from the previous run. You must declare this run as a variable in order to plot the output. For example, use KRC_Out.
Example 1: Diurnal Temperature
First, plot Kinetic Surface Temperature as a function of hours for a given season of the year. The seasons are contained in the element "ls". There are 360 values for possible season indicators. Keep in mind ls[1,1,90] is not LS of 90, it is index 90 of ls. LS 90 = ls[1,1,105]
dv> KRC_Out = krc(lat = -4.5, lon = 137.4, ELEV = -4.4, SLOPE = 1.2, SLOAZI = 43) dv> pplot(KRC_Out.tsurf[,,105], Xaxis = KRC_Out.time, xlabel = "Hour", ylabel = "Kinetic Surface Temperature (K)", plot_title = "Diurnal Temperature", "Daily Temp"]
Example 2: Seasonal Temperature
Next, plot Kinetic Surface Temperature as a function of season for a given hour of the day. The given hour of the day is defined by the
dv> pplot(KRC_Out.tsurf[52,,], Xaxis = KRC_Out.ls, xlabel = "Seasonal Indicator", ylabel = "Kinetic Surface Temperature (K)", plot_title = "Seasonal Temperature", "Seasonal Temp")
Example 3: Multiple Curves in Same Plot
Now, plot several times of day on the same plot throughout an entire year. Each curve represents a different time of the day. Notice the x-axis range is 0 to 360 (i.e. the full range of LS, or a full year).
dv> pplot({KRC_Out.tsurf[24,,],KRC_Out.tsurf[48,,],KRC_Out.tsurf[72,,]},{"Hour = 6 AM", "Hour = 12 PM", "Hour = 6 PM"}, xaxis = gale.ls, xlabel = "Hour", ylabel = "Kinetic Surface Temperature (K)", plot_title = "Diurnal Temperatures Changes at Specific Times", key = "top left")
Example 4: Plotting an Entire Season or Day
Now, plot all seasons over an entire day. This will show how daily temperatures change over the course of a year. Each curve will represent a different time of year. Notice the x-axis range is 0 to 24 (i.e. the hours in a day).
dv> pplot(KRC_Out.tsurf[,,], Xaxis = KRC_Out.ls, xlabel = "Seasonal Indicator", ylabel = "Kinetic Surface Temperature (K)", plot_title = " Temperature", "Seasonal Temp")
Knowing What to Plot Based on Analysis' Needs
- The choice on what to plot completely depends on the particular science goals.
Therefore, it is paramount to understand exactly what In order to know what KRC is incredibly flexible and has a wide range of functionality. Therefore, it is important to learn the basic capability of KRC. What can it do? How does it work? How specific can conditions be adjusted within the model? In short, KRC can do a great deal and can vary almost any condition desired. The goal of this wiki page is to introduce new users to KRC and reveal the full capabilities of KRC to both general and more advanced users. Good luck, and happy modeling. Once you fully understand your science goals, and what you hope to prove, determine or represent, you can plot the output.
KRC Modes
Description
There are two modes to use within KRC; Normal and OnePoint. However, OnePoint Mode has an alternative version called Simulated OnePoint Mode.
Normal Mode
- This is the standard mode of operation in Davinci. This takes dozens of possible input parameters to produce the surface temperatures of specific locations on Mars.
OnePoint Mode
NOTE: KRC OnePoint Mode currently does not work. Instead, use Simulated OnePoint Mode
Simulated OnePoint Mode
This mode of operation only applies to davinci and not KRC.
Start davinci as normal.
>davinci dv>
Now, Simulated OnePoint Mode is used to calculate Thermal Inertias for the surface of Mars.
There are certain required parameters when using Simulated OnePoint Mode:
- lat (as always)
- ls (the seasonal indicator)
- hour (the hour of the day)
- T (a temperature for the surface)
In this case, we will use the standard surface temperature of 220 K, and continue using Gale Crater for the remaining parameters.
dv> krc(lat = -4.5, lon = 137.4, ELEV = -4.4, SLOPE = 1.2, SLOAZI = 43, T = 220, ls = 105, hour = 13)
Found Default File: $DV_SCRIPT_FILES/krc_support/porb_defaults/Mars_Mars.porb.hdf
./nfs/software/davinci_install/share/davinci//library/script_files/krc_support/ti_map2ppd_v4.vicar: VICAR bsq image: 720x360x1, 32 bits
./nfs/software/davinci_install/share/davinci//library/script_files/krc_support/albedo_2ppd.vicar: VICAR bsq image: 720x360x1, 32 bits
Running KRC model with:
Output:
Every ~8.000 Ls (15.2664 JD) for 45 seasons starting at 0.10 Ls
For 96 times per day, every 15 local minutes
Running model WITH temperature prediction for speed
For a Surface With:
29 Layers with uniform material properties and 384 daily model time steps
and T-dependant material properties
and an insulating bottom edge condition
With Observation Parameters:
LATITUDE: -4.50 LONGITUDE: 137.40
ELEVATION: -4.400km^ SLOPE/AZIMUTH: 1.20/43.00deg
ALBEDO: 0.228^ OPACITY: 0.300
HOUR: 13.00 LS: 105.00
Running One-Point Simulation Mode
Interpolating for TI values: 2200.00 to 20.00
with temperatures: 230.53K to 276.58K
from table indices: 1 to 40
20.00000000
