Simulated One Point Mode
(Created page with "===Simulated One Point Mode=== This mode is currently only supported for Mars. It requires to provide: 1: a Temperature T 2: @ a season ls 3: @ a LTST hour OUT = krc(lat ...") |
|||
| Line 12: | Line 12: | ||
The output is the equivalent thermal inertia in J m-2 K-1 s-1/2, in this case OUT = XXX. | The output is the equivalent thermal inertia in J m-2 K-1 s-1/2, in this case OUT = XXX. | ||
| − | The One-Point Mode outputs a TI (SI) for an array of input temperatures with the given parameters | + | The One-Point Mode outputs a TI (SI) for an array of input temperatures with the given parameters |
| + | |||
It can output various values that indicate why a TI was not derived for failure cases: | It can output various values that indicate why a TI was not derived for failure cases: | ||
| + | |||
-600: The Temperature provided is lower than the lowest model output. Possible Frost Presence | -600: The Temperature provided is lower than the lowest model output. Possible Frost Presence | ||
| + | |||
-500: No value was derived or returned. KRC may have failed to run all together | -500: No value was derived or returned. KRC may have failed to run all together | ||
| + | |||
-400: Negative TI value. This is a non-physical return as a function of the fitting routine | -400: Negative TI value. This is a non-physical return as a function of the fitting routine | ||
| + | |||
-300: TI value larger than 2200 SI. 2200 SI is the top of the available lookup table and extrapolation is not permitted | -300: TI value larger than 2200 SI. 2200 SI is the top of the available lookup table and extrapolation is not permitted | ||
| + | |||
-200: Returned TI value doesn't meet proximity criterion (TI_Guess_PCT) | -200: Returned TI value doesn't meet proximity criterion (TI_Guess_PCT) | ||
| + | |||
-100: Bad TI_Guess / TI_Guess_PCT combination. This is most likely a user error | -100: Bad TI_Guess / TI_Guess_PCT combination. This is most likely a user error | ||
Revision as of 22:17, 8 January 2019
Simulated One Point Mode
This mode is currently only supported for Mars.
It requires to provide: 1: a Temperature T 2: @ a season ls 3: @ a LTST hour
OUT = krc(lat = 0., lon = 0., T = 170., ls = 152.4, hour = 3.12)
The output is the equivalent thermal inertia in J m-2 K-1 s-1/2, in this case OUT = XXX.
The One-Point Mode outputs a TI (SI) for an array of input temperatures with the given parameters
It can output various values that indicate why a TI was not derived for failure cases:
-600: The Temperature provided is lower than the lowest model output. Possible Frost Presence
-500: No value was derived or returned. KRC may have failed to run all together
-400: Negative TI value. This is a non-physical return as a function of the fitting routine
-300: TI value larger than 2200 SI. 2200 SI is the top of the available lookup table and extrapolation is not permitted
-200: Returned TI value doesn't meet proximity criterion (TI_Guess_PCT)
-100: Bad TI_Guess / TI_Guess_PCT combination. This is most likely a user error
